Dental Prosthetics in Albania for
Crowns, Bridges, and Dentures.
Whether you need a single partial denture, a full set of conventional dentures, an implant-supported overdenture, or a complete fixed arch, Andent Clinic fabricates every prosthetic in-house in Tirana. Results in days, not weeks. Up to 80% less than UK private prosthetics fees.
Prosthodontics in Albania for
Crowns, Bridges, Dentures and Implant Restorations
From removable dentures to fully fixed implant restorations, Andent Clinic offers the complete prosthetics spectrum in Tirana. Not all prosthetics are the same. The right solution for replacing missing teeth depends on how many teeth are missing, the condition of the remaining teeth and bone, the patient’s lifestyle, and budget. For international patients choosing dental tourism in Albania , Andent Clinic provides prosthetic treatment planning, in-house laboratory fabrication, and coordinated clinical care in one place.
This page covers the full range of prosthetic options available at Andent Clinic, from conventional removable dentures through to implant-supported fixed arches. Depending on the case, your plan may include dental implants, dental crowns, dental bridges, All-on-4 dental implants , or a complete full-arch restoration.
Conventional Dentures
The most accessible prosthetic option. Conventional dentures rest on the gum tissue and rely on suction and soft tissue for retention. They are suitable when dental implant placement is not an option, or when the patient prefers a removable solution at the lowest cost. They may require adjustment, relining, or replacement over time as the jaw and supporting tissues change.
Implant-Retained Overdenture
Two or four dental implants can serve as anchor points for a removable denture. The prosthesis clips or locks onto the implants, helping improve stability during eating and speaking. It is still removed for cleaning, but can provide greater retention than a conventional denture. This option may suit patients who want additional stability without choosing a fully fixed All-on-4 restoration.
Fixed Full-Arch Prosthesis
All-on-6: €4,650–€6,000 per arch
An All-on-4 or All-on-6 prosthesis is fixed to four or six implants and is designed to provide a stable, non-removable restoration for a full dental arch. The prosthesis is removed only by a dental professional when clinically required. It can provide a high level of function and stability for suitable patients. For patients comparing full-mouth restoration options, treatment planning may also involve zirconia crowns, dental bridges, and comprehensive smile planning.
Not sure which prosthetic solution is right for you? Book a free consultation and send clear photos, a panoramic X-ray, or details of your previous dental treatment. The Andent clinical team can advise whether your case is better suited to removable dentures, an implant-retained overdenture, dental bridges, crowns, or a fixed full-arch implant restoration.
The honest breakdown
of every prosthetic type
Understanding what each prosthetic type can and cannot do helps patients make a more informed decision. Here is a direct account of each option, including what works well, what the trade-offs are, and when it may make sense clinically.
Complete dentures:
when they are the right choice
A complete denture replaces a full arch of missing teeth with an acrylic base shaped to rest on the gum ridge. The upper denture relies heavily on suction against the palate. The lower denture can be less stable because the tongue and cheek muscles influence its movement.
Complete dentures may be appropriate when all teeth in an arch are already lost, when the patient does not want implant surgery or is not clinically suitable for it, or when the available budget does not extend to implant-based solutions. They may also be considered when significant bone loss makes implant treatment more complex or would require additional procedures such as bone grafting.
What patients should understand before getting conventional dentures: the jaw ridge can continue to change over time after tooth loss because there are no natural tooth roots stimulating the bone. For this reason, dentures may become looser and can require adjustment, relining, or replacement as the supporting tissues change.
At Andent Clinic, complete dentures are fabricated using acrylic teeth selected to provide a natural appearance, with the base shade matched to the patient’s gum tissue. The in-house laboratory allows multiple try-in appointments during the same visit so that fit, bite, and appearance can be reviewed before the final prosthesis is completed.
What works well
- Most affordable full-arch solution
- No implant surgery required
- Quick fabrication in 4 to 5 days
- Can be adjusted or replaced when required
- May be suitable even where significant bone loss is present
Trade-offs to know
- Can move during eating and speaking
- The supporting ridge can continue to change over time
- May require relining or replacement over the years
- Lower dentures can be less stable than upper dentures
Partial dentures: replacing
some teeth while keeping others
A partial denture fills the gaps left by missing teeth while gaining support from the remaining natural teeth and oral tissues. It can be considered when some teeth remain in the arch. Two options described here are the flexible Valplast partial and the chrome-cobalt framework partial.
Valplast flexible partials use a flexible thermoplastic material and can avoid visible metal clasps in suitable cases. Their flexibility can improve comfort and reduce the risk of fracture if the prosthesis is dropped. One limitation is that modification or addition of teeth after fabrication can be more difficult, so future tooth loss may require a new prosthesis.
Chrome-cobalt metal framework partials use a rigid metal framework with acrylic teeth and gum-coloured material. The framework can provide a thin, strong and accurately fitting structure. Depending on the design, the prosthesis may be modified if additional teeth are lost.
Valplast advantages
- Can avoid visible metal clasps in suitable cases
- Flexible and lightweight
- Natural-looking gum-coloured material
- Good resistance to fracture if dropped
Chrome-cobalt advantages
- Strong, thin framework
- May be modified if more teeth are lost
- Long-term option when maintained appropriately
- Can distribute forces across supporting teeth
Telescopic prosthetics:
the option many patients have not heard of
A telescopic prosthesis is a technically advanced form of removable prosthetic treatment that requires careful clinical and laboratory planning.
The system works using a double-crown mechanism. Inner primary crowns are permanently fixed to suitable abutment teeth or implants. The outer secondary crowns are integrated into the removable prosthesis and fit over the inner crowns. The connection between the components provides retention without conventional visible clasps.
A key advantage of the telescopic system is the way it can distribute forces across suitable remaining teeth or implants. This can make it useful for selected patients who still have a limited number of strategically positioned natural teeth. In some cases, the prosthesis may also be modified if an additional tooth is later lost.
Telescopic prosthetics can be considered for patients who have suitable remaining teeth or implants to support the system but for whom a fully fixed restoration is not appropriate. They can provide improved retention compared with conventional removable options while remaining removable for cleaning.
Key advantages
- Strong retention without conventional visible clasps
- Can distribute forces across suitable abutments
- May be modified if additional teeth are lost
- Can be supported by natural teeth or implants
- Good aesthetic potential compared with visible metal clasps
Considerations
- Requires precise clinical and laboratory work
- Abutment teeth may require crown preparation
- Higher initial cost than conventional partial dentures
- Suitability depends on the condition and position of the supporting teeth or implants
When prosthetics are anchored
to dental implants
One limitation of conventional removable prosthetics is that they rest on oral tissues that can change over time. After tooth loss, the jaw ridge can gradually change in shape and volume, which may affect denture stability. Implant-supported prosthetics use dental implants to provide additional retention and support, helping create a more stable restorative solution for suitable patients.
Two implants placed in the front region of the lower jaw can provide anchor points for a removable overdenture using suitable attachment components. The denture connects to the implants to improve retention and reduce movement during eating and speaking compared with a conventional removable denture. The prosthesis remains removable for daily cleaning. This treatment can be considered for patients who want greater denture stability without moving directly to a fully fixed full-arch restoration.
Four implants can be connected by a precision-fabricated bar that runs along the jaw. The removable prosthesis attaches to the bar using compatible retention components. The connected design can distribute functional forces across multiple implants and provide increased retention compared with a conventional denture or a simpler two-implant overdenture. Depending on the patient’s anatomy and treatment plan, this type of prosthesis may be considered for either the upper or lower jaw. It remains removable for cleaning.
All-on-6: €4,650–€6,000 per arch
An All-on-4 or All-on-6 restoration uses four or six dental implants to support a fixed full-arch prosthesis. Unlike a removable denture, the restoration remains fixed during normal daily use and is removed by a dental professional when clinically required. Implant-supported full-arch treatment can provide a high level of stability, chewing function, and confidence for suitable patients. Dental implants also help transmit functional forces to the surrounding bone, although normal biological changes can still occur over time. The final prosthesis is planned and fabricated through Andent Clinic’s in-house laboratory according to the patient’s clinical requirements.
Prosthetic materials:
what each one offers and where it is used
The material a prosthesis is made from determines its aesthetics, its strength, its weight, and how it interacts with the tissues in the mouth over time. Here is the honest breakdown of each material used in Andent Clinic’s in-house laboratory.
Premium Acrylic
High-impact acrylic is the standard base material for complete dentures. The teeth are set in acrylic and the base is characterised to match gum tissue colour. Modern premium acrylic teeth have graduated colouring similar to natural dentition. Acrylic is comfortable against soft tissue, easily adjusted, and can be repaired. It is not the strongest material for heavy occlusal loads.
Complete dentures · Immediate dentures
Chrome-Cobalt Alloy
A rigid metal alloy used for partial denture frameworks. Significantly stronger and thinner than acrylic alone. The precise fit of a chrome-cobalt framework distributes occlusal forces through the remaining teeth more effectively than a plastic framework. Can be cast or milled digitally using CAD/CAM technology for improved accuracy. The metal is non-precious and biocompatible.
Partial denture frameworks · Telescopic inner crowns
Valplast Thermoplastic Nylon
A flexible biocompatible nylon used exclusively for partial dentures. The material is tooth-coloured and gum-coloured throughout, eliminating the need for visible metal clasps. Its flexibility allows it to enter undercuts that rigid materials cannot, improving retention in some cases. Cannot be adjusted or repaired after fabrication; any future changes require a new prosthesis.
Flexible partial dentures · Cosmetically sensitive cases
Monolithic Zirconia
The highest-strength ceramic material available for dental prosthetics. Used for the definitive prostheses in All-on-4 and All-on-6 fixed arches. Zirconia resists chewing forces that would fracture weaker ceramics, is biocompatible, metal-free, and provides excellent aesthetics. Each zirconia arch is milled from a single block in the in-house CAD/CAM laboratory to tolerances of 0.01mm.
All-on-4 and All-on-6 definitive prostheses
Reinforced Acrylic (PMMA)
Polymethyl methacrylate reinforced with glass fibre or metal mesh. Used for the provisional fixed prosthesis placed immediately after All-on-4 or All-on-6 surgery. Lighter and less expensive than zirconia, but adequate for the osseointegration period. The reinforced structure resists fracture during the critical healing phase when bite forces need to be carefully managed. Replaced by the definitive zirconia arch after full osseointegration.
Provisional All-on-4 and All-on-6 prostheses
Titanium (frameworks and attachments)
Titanium is used for bar superstructures in bar-retained overdentures and for the screw-retained connections in fixed arch prostheses. It is the same biocompatible titanium alloy used in implants. Titanium components are precision-milled digitally for exact fit. The connection between titanium components and implant bodies is the most critical junction in any implant-supported prosthesis.
Bar-retained overdentures · Implant connectionsThe bone resorption problem that every denture wearer should understand
When a tooth is removed, the jaw bone that supported it begins to resorb because there is no longer a root transmitting forces into the bone. This resorption is progressive and permanent. A complete denture resting on the gum ridge accelerates this process in one important way: each time the denture is pressed onto the bone during chewing, the pressure accelerates resorption of the ridge beneath it.
The clinical consequence over time is a flattening of the jaw ridge that makes dentures increasingly difficult to retain. Patients who wore well-fitting dentures at 60 often struggle with significantly looser prosthetics at 70 and cannot get adequate retention from dentures at 80. This is not a denture quality problem; it is the inevitable consequence of bone resorption continuing over decades.
Implants interrupt this process. A titanium implant in the bone stimulates it through osseointegration, transmitting forces that signal the bone to maintain its density and volume. The jaw bone around a well-placed implant remains stable in a way that the ridge beneath a conventional denture does not. This is the most important long-term clinical argument for implant-supported prosthetics that most patients do not hear until the problem has already progressed substantially.
From clinical records
to fitted prosthesis in one visit
Because the laboratory is inside the clinic building, the prosthetic fabrication process at Andent is significantly faster than at practices relying on external laboratories. Most prosthetics are completed within a single 5 to 7 day visit, with multiple try-in appointments to confirm fit and aesthetics before the final prosthesis is finished.
Clinical assessment and records
Examination, X-rays and impressions of both arches. Assessment of bite registration, existing tooth positions (if applicable), and soft tissue conditions. Shade selection using a tooth and gum guide in natural light.
Framework fabrication or wax trial
For metal framework partials: framework is cast and refined. For complete dentures: wax try-in arrangement allows the patient to evaluate the tooth positions, smile line, and vertical dimension before any irreversible processing occurs.
Wax try-in appointment
The wax prosthesis is seated in the mouth and assessed from every angle. Tooth shape, colour, and gum characterisation are evaluated and adjusted. The clinician and technician review together. Any changes are made before the final processing step.
Processing and finishing
For acrylic prosthetics: the wax is replaced with acrylic in a controlled curing process. For metal and Valplast partials: final finishing and polishing. For telescopic and implant-supported prosthetics: digital milling and assembly.
Fitting and occlusal adjustment
The finished prosthesis is fitted. Pressure points are identified and relieved. Bite is verified across all contact points. Adjustments are made chairside as needed. For implant prosthetics: torque values are verified and recorded.
Final check and clinical report
A final review appointment confirms comfort and function. Full clinical documentation is provided in English for the patient’s home dentist. Instructions on cleaning, maintenance, and when to seek review are provided before departure.
Signs that your current denture
needs replacing or upgrading
Many patients come to Andent Clinic not because they are getting dentures for the first time, but because their existing dentures are failing them. The signs are usually gradual enough that patients adapt their eating habits and social behaviour around them without fully registering the deterioration.
Movement during eating or speaking
If you are modifying your diet to avoid foods that might dislodge your denture, or if you are conscious of the prosthesis moving when you speak, the denture has become ill-fitting and needs attention.
Sore spots on the gum tissue
Localised soreness or ulceration under a denture indicates pressure points from an ill-fitting base. Left untreated, persistent pressure on the gum tissue can cause irreversible damage.
The denture is more than 5 to 7 years old
Even a well-made denture becomes ill-fitting over time as the jaw bone beneath it resorbs. A denture that fitted perfectly at fabrication rarely fits well 7 years later without relining.
Using denture adhesive habitually
Occasional use of adhesive for specific occasions is acceptable. Relying on adhesive daily to hold the denture in place is a sign that the fit has deteriorated and either relining or replacement is needed.
Changes in facial appearance
As bone resorbs and the vertical dimension of the jaw changes, the face takes on a sunken appearance. A correctly designed replacement denture restores the facial height that was present when the original denture was made.
- Clinical assessment to establish whether the prosthesis needs relining, rebasing, or full replacement
- Relining: new acrylic is added to the fitting surface to restore the match between prosthesis and changed gum tissue. Faster and less expensive than replacement when the prosthetic teeth are still in good condition
- Rebasing: the entire acrylic base is replaced while keeping the existing tooth arrangement. Used when the teeth are acceptable but the base has become porous or structurally compromised
- Full replacement with improved design: when the existing prosthesis has fundamental design problems beyond fit, a new prosthesis is planned with improved retention features, corrected occlusion, and updated aesthetics
- Upgrade to implant-supported: when a patient arrives with failing conventional dentures, the discussion always includes the implant-supported option. For many patients who have lived with loose dentures for years, this is the conversation that changes their quality of life
Prosthetics costs: Albania
vs UK, Germany and Switzerland
All Andent Clinic prices are for the complete fabrication and fitting process. UK and European prices reflect average private dental prosthetics fees in each country. NHS prices in the UK are provided for context only, as they cover limited prosthetic options.
| Prosthetic type | UK private | Germany | Switzerland | Andent, Albania | Saving vs UK |
|---|---|---|---|---|---|
| Complete acrylic denture (per arch) | £1,000 to £2,000 | €900 to €1,800 | CHF 1,400 to 2,800 | €350 to €600 | up to 75% |
| Complete dentures (both arches) | £2,000 to £4,000 | €1,800 to €3,600 | CHF 2,800 to 5,600 | €700 to €1,200 | up to 75% |
| Flexible partial denture (Valplast) | £1,200 to £2,200 | €1,100 to €2,000 | CHF 1,600 to 3,000 | €400 to €650 | up to 73% |
| Chrome-cobalt partial framework | £1,400 to £2,500 | €1,200 to €2,200 | CHF 1,800 to 3,500 | €450 to €750 | up to 73% |
| Telescopic prosthesis | £5,000 to £12,000 | €4,500 to €11,000 | CHF 7,000 to 16,000 | €1,500 to €3,500 | up to 75% |
| Implant overdenture (2 implants + prosthesis) | £4,000 to £7,000 | €3,500 to €6,500 | CHF 5,500 to 9,000 | €1,200 to €2,000 | up to 76% |
| All-on-4 fixed arch (complete) | £10,000 to £18,000 | €9,000 to €16,000 | CHF 14,000 to 22,000 | €3,200–€3,400 | up to 74% |
| Denture reline (existing prosthesis) | £400 to £800 | €350 to €700 | CHF 550 to 1,000 | €150 to €250 | up to 70% |
Estimate your prosthetics treatment cost
Select the treatments you are considering to receive an estimated cost before requesting your personalised treatment plan.
Why can prosthetics cost less in Albania? Treatment fees can differ between countries because of differences in clinical labour, laboratory costs, operating expenses, taxation, and other practice overheads. Andent Clinic uses established dental materials and an in-house laboratory for prosthetic fabrication. The final cost depends on the type of prosthesis, materials selected, and the patient’s individual clinical requirements.
Dental prosthetics abroad: who benefits and what to expect
Not every prosthetic treatment is a practical candidate for dental tourism. A routine denture reline or a single partial denture requires 1 to 2 days at most and represents a relatively modest saving over UK prices. For those cases, the arithmetic of travel may not justify the trip unless it is combined with other treatments.
The cases where prosthetic treatment abroad makes a compelling argument are the more complex ones. A full set of complete dentures for both arches costs £2,000 to £4,000 in UK private practice and €700 to €1,200 at Andent Clinic. A telescopic prosthesis costs £5,000 to £12,000 in the UK and €1,500 to €3,500 in Tirana. A complete All-on-4 solution costs £10,000 to £18,000 in the UK and €3,200–€3,400 per arch at Andent Clinic. For these cases, the saving can be substantial enough that travel costs represent a smaller proportion of the overall treatment budget.
The in-house laboratory is one of the features that makes prosthetic dental tourism at Andent Clinic practical for international patients. Prostheses fabricated through an external laboratory can require additional waiting time and separate laboratory stages. Andent’s in-house workflow allows most prosthetic cases to be planned, fabricated, adjusted, and fitted within a coordinated stay of approximately 4 to 6 days, depending on the treatment.
For patients with existing dentures that need relining or replacing, the trip can be relatively efficient. A clinical assessment and reline may be completed within 1 to 2 days, while a full denture replacement typically requires approximately 5 to 6 days. Many patients combine prosthetic work with other treatments they have been postponing, such as dental crowns, composite fillings, or periodontal cleaning. The clinic coordinates the treatment schedule according to the patient’s clinical requirements and available stay.
What patients say about
their treatments at Andent
What patients ask before
choosing Andent Clinic
Ready for a personal quote?
Send photos of your current situation or any existing X-rays. The clinical team reviews your case and sends a personalised prosthetics recommendation and exact price within 24 hours.
Mon–Fri · 09:00–18:00 · Sat · 09:00–14:00 CET
WhatsApp available 7 days
Response within 24 hours
Other treatments to combine
in the same trip
Better-fitting prosthetics.
A fraction of what you have been quoted.
Send photos or X-rays of your current situation. We review your case and send a personalised prosthetics recommendation with exact pricing in 24 hours. Free, no obligation.
